Overall approx size

- 2245mmL x 980mmW (with railing x min. height: 470mm to 700mm)

Excellent Beds - 002 - ADJUSTABLE BEDSIDE TABLE

Overall approx size

- 775mmL x 400mmW x adjustable height: 760mm to 1050mm.

Overall approx size

- 1390mmL x 375mmH.

- Preheated and powder coated. ( Brackets for above to be ordered along with bed )

Overall approx size

- 2160mmL x 985mmW x 600mmH.

- Two section perforated top.
- Backrest adjustable on screw mechanism.
- Trendelenburg and reverse Trendelenburg adjustments on gas spring.
- Removable tubular head and foot bows with membrance pressed panels.
- Four castors 125mm dia., two with brakes and two without brakes, made from non-rusting composite material.
- Corner buffers Provision for lifting pole/IV rod.
- Pretreated and powder coated.

Overall approx size

- 2250mmL x 985mmW x 600mmH.

- Four section perforated top.
- Two separate screws for backrest, kneerest, Trendelenburg/Reverse Trendelenburg adjustments on gas spring.
- Removable tubular head and foot bows with membrane pressed panels.
- Four castors, 125mm dia., two with brakes and two without brakes made from non-rusting composite material.
- Corner buffers. Provision for lifting pole/ IV rod.
- Pretreated and powder coated.

Overall approx size

- 2250mmL x 985mmW x 485/710mmH.

- Four section perforated top.
- Two separate screws for backrest, kneerest Trendelenburg/Reverse Trendelenburg adjustments on gas spring.
- Height adjustments on hydraulic pump.
- Removable tabular head and foot bows with membrane pressed panels.
- Four castors 125mm dia., two with brakes and two without brakes, made from non-rusting composite material.
- Corner buffers, provision for lifting pole/ V rod Pretreated and powder coated.

Overall approx size

2250mmL x 985mmW (with railing) x 485/710mmH.

- Four section perforated top.
- All controls for backrest, kneerest, height, Trendelenburg & reverse Trende enburg on electro-mechanical actuators which can be operated and locked from the foot end with the assistant control panel (ACP) box.
- Patient friendly handled remote adjusts height, backrest& knee rest.
- Removable tabular head and foot bows with membrance pressed panels.
- Four 125mm dia. – swive, non-rusting castors, with central & directional locking.
- Corner buffers. Full length swing down safety side railings.
- SS telescopic V rod Provision for lifting pole.
- Fitted with bed stripper, Battery & Battery charger.
- Emergency CPR: A push ever allows the backrest to ower instanty.
- Pretreated & powder coated.

Overall approx size

- 400mm square x 820mmH.

- Locker made from machine pressed CRCA steel sheet enclosed on three sides, having one box and drawer fitted with membrane pressed top with raised edges, drawer front and cabinet door.
- Mounted on four swivel twin wheel castors, 50mm dia.
- Buffers at rear pretreated and powder coated.

Overall approx size

- 730mmL x 400mmW x 785/1050mmH., Top size 700mmL x 400mmW.

- Single section membrane pressed top with raised edges.
- MS square tabular telescopic stem, fitted with gas spring for adjustment. MS rectangular tabular base frame mounted on four swivel-twin-wheel castors. 50mm dia.
- Pretreated and powder coated.
- Supplied in kdc.

Top